HARD PLASTICS ADHESIVE
For repairs to hard plastics
Clear
Features & Benefits
Bostik Hard Plastics adhesive has the advantages of easy application and immediate strength on contact for all those tougher repairs to hard or rigid plastics.
- Bonds most hard plastics including PVC-U, ABS and High Polystyrene
- Ultra strong, long lasting, and fast setting bond
- Water resistant
Bostik Hard Plastics adhesive is suitable for:
- PVC-U
- ABS
- High impact polystyrene
It has wide range of uses for repairing household objects. Bostik Hard Plastics adhesive is also useful for sticking most clear plastics, wood, metal and leather.
Documents & Resources
Bostik DIY Philippines Repair - Hard Plastic Technical Data Sheet (268.03 KB)
Bostik DIY Philippines Repair - Hard Plastic Safety Data Sheet (115.87 KB)
How to use
For best results, ensure surfaces are dry, clean and free from dust and grease. Wearing gloves is recommended.
Application
- Remove tube cap. Using a brush, spread a thin layer of the adhesive evenly over both surfaces.
- Leave the coated surfaces until the adhesive is no longer tacky, approximately 10 minutes at normal room temperature.
- Once glue is no longer tacky, ensure surfaces are accurately aligned and then press firmly together. They will stick immediately.
Cleaning
- After use, wipe the nozzle with a clean dry cloth (avoiding skin contact).
- Bostik Hard Plastics adhesive can be removed using acetone before set. Solvents can damage some surfaces, therefore carry out a test on a small area first.
Find new, smarter ways of doing things.
Find out what product you need, how to use it and where to buy it.
PRODUCT FINDER