Features & Benefits
Bostik Repair All is an all-purpose repair adhesive for various kinds of surfaces. When cured, it forms a durable rubber.
- Solvent, isocyanate, phthalate, and tin free, with almost no odour
- Dual nozzles for fine and wide applications
- High temperature resistance
- Paintable
- Non-corrosive
Bostik Repair All provides excellent adhesion to many substrates, including wet surfaces. It's best for:
- Joint wood
- Glass
- Metal
- Plastic or mineral based substrates
- Skirting boards
- Cables
Downloads & resources
Bostik DIY Hong Kong Repair - Repair-all Technical Data Sheet (494.21 KB)
How to use
Ensure all surfaces are clean, dry, and free of dust, dirt, rust, oil, and other contaminants.
We recommend a preliminary test of the compatibility of the adhesive with adjoining materials before use.
Application
- To bond non-absorbent surfaces such as metal or glass, use a brush to apply a thin film of adhesive to both surfaces. Allow 5 to 10 minutes drying time and then, having correctly positioned the surfaces, press them together firmly. The bond will be instant and non-adjustable.
- If one or both surfaces are absorbent apply a generous film of adhesive to one surface only and immediately join the two surfaces together under pressure. Note: using this technique, initial bond strengths will be lower.
Cleaning
- Remove excess uncured sealant with a damp cloth or water immediately.
- Cured sealant is best removed by mechanical scraping or sanding.
- Use Bostik Handy Wipe towels to remove adhesive from skin.
Find new, smarter ways of doing things.
Find out what product you need, how to use it and where to buy it.
PRODUCT FINDER