SOFT PLASTICS ADHESIVE
Repair glue for soft plastic materials
Transparent
Features & benefits
Bostik Soft Plastics is an ultra strong, quick drying, water resistant, clear adhesive that's perfect for making flexible repairs to things like inflatables, plastic raincoats, and tents.
- Formulated to work on soft plastics
- Provides a flexible bond
- Ultra strong and quick drying
- Water resistant
- Comes with a PVC repair patch
Bostik Soft Plastics is suitable for bonding:
- Flexible PVC
- Polyurethane
- Natural and sulfochlorinated rubbers
After something for hard plastic? Try Bostik Hard Plastics
Downloads & resources
Bostik DIY Thailand Repair Soft Plastics Technical Data Sheet (284.8 KB)
Bostik DIY Thailand Repair Soft Plastics Safety Data Sheet (369.02 KB)
How to use
Ensure that surfaces to be bonded are clean and dry. For best results do not use below 15°C.
Lightly abrade very smooth shiny surfaces using fine sandpaper, taking care not to damage any areas that will
be visible after bonding.
If using on rubber products, lightly roughen the surface to be repaired using a fine grade sandpaper.
Application
- Always open and use adhesive products over a protected surface.
- If required use a piece of the PVC patch provided.
- Spread an even film of adhesive onto both surfaces.
- Leave until almost dry (about 5 to 10 minutes).
- Press both surfaces together firmly until bonded.
- Replace cap immediately after use, to prevent the adhesive becoming unusable.
- Maximum bond strength is developed after approximately 48 hours.
Cleaning
- Always test sensitive surfaces before applying solvent cleaners.
- Clean greasy, waxy or oily surfaces with fresh acetone, twice to remove residues left by the first cleaning.
- Wet or dry adhesive can be removed with acetone.
Find new, smarter ways of doing things
Find out what product you need, how to use it and where to buy it.
Product Finder