FIX 'N FLASH
Strong, light-activated glue. Bonds 99.9% of materials! The advanced technology gives you time to get the position right before you set the glue
Clear
Features & benefits
Bostik Fix & Flash is an ultra strong, light-activated glue that sticks almost anything - even between opaque materials. The glue does not set until you shine the light, so that you can position and reposition until you're happy!
- Repositionable until you shine the light
- Works on 99.9% of materials, including opaque surfaces
- Shock resistant - Water resistant
- Resistant to extreme temperatures (-20°C to +80°C)
- Odourless - Can be sanded and painted
Materials: Porcelain, cermaics, glass, mirror, leather, wood, paper, carton, metal, fabrics*, hard plastics, tiles, concrete, brick, stone.... *staining tests should be performed before use
#REPAIRHERO: Lamps, shoes, furniture, toys, glasses, mugs, and many many more.....
DON'T BIN IT! FIX IT!
Downloads & resources
Bostik DIY South Africa Repair - Fix 'n Flash Technical Data Sheet (512.84 KB)
Bostik DIY South Africa Repair - Fix 'n Flash Safety Data Sheet (715.28 KB)
How to use
For best results ensure both surfaces are dry, clean and free of dust and grease.
Using the product for the first time: Screw the nozzle onto the tube and remove the cap to use. Apply a small amount of glue to create a continuous bead on the edges of the object. You have time to reposition your objects. Wait t least 3 seconds for an initial tack. Switch on the light and shine it around the edge for 15 seconds.
Adapt time for different materials if necessary. After each use, clean the nozzle and screw the cap on tightly.
Watch video
FAQs
How do I store my adhesive?
Most adhesives have a shelf life of at least 12 months if stored in a cool (below 25°C), dry place in its original moisture-tight container. If the material is kept beyond the recommended shelf life, it is not necessarily unusable, but a check should be performed to observe whether the product is still workable, apply-able and uncured.
How do I remove glue from my fingers?
Rinse your fingers immediately with plenty of warm soapy water and do not pull on the skin that has been glued. If glue remains after using warm soapy water, it will often de-bond within a couple of days due to general wear and tear and the natural oils in the skin. If skin irritation occurs, consult a doctor.
How do I prepare the surfaces to be glued?
Before applying glue, ensure that all surfaces are of sound nature and clean, dry and free from dust, grease or any other contamination.
Find new, smarter ways of doing things.
Find out what product you need, how to use it and where to buy it.
PRODUCT FINDER