INDUSTRIAL STRENGTH MOUNTING TAPE
High-performance mounting tape for indoor/outdoor use, replacing rivets, screws, and welding. Ideal for attaching signage to various surfaces like metal, wood, and glass.
White
Features & benefits
Bostik Industrial Strength Mounting Tape eliminates the use of rivets, screws and welding and is suitable for interior and exterior use, to fix body & roof panels in the bus & truck industry and for mounting outside signage onto smooth surfaces such as tiles, metal, wood, board, stone, glass and fiberglass.
Certain porous surfaces such as plaster & concrete, and absorbent surfaces such as untreated wood & fabrics, will require priming or sealing. Will not bond to olypropylene, polyethylene and Teflon plastics. Full bond strength is achieved after 72 hours. Keep out of reach of children and pets. The above information is offered as a guide to the use of this product. We cannot accept liability for damages as this product is used outside our control.
Downloads & resources
Bostik DIY South Africa Repair - Industrial Strength Mounting Tape Technical Data Sheet (993.42 KB)
How to use
Ensure the surface is smooth, clean, dry and free from dust and grease. Press the adhesive side of the tape firmly onto the object to be mounted. Peel off the backing paper, position the object & apply firm pressure for 60 seconds. Final holding strength will be achieved after 24 hours.
Product must be removed mechanically. Adhesive residue can be removed with acetone.
FAQs
Can I reuse Bostik Mounting Tape Strips
Bostik Mounting Tape Strips are designed for one-time use. Attempting to reuse them may result in reduced adhesion and may not securely mount the object. For repositioning, it's recommended to use new Mounting Tape Strips for optimal results.
Can I use Bostik Mounting Tape Strips on all surfaces?
While Bostik Mounting Tape is designed for use on smooth surfaces such as tiles, metal, wood, glass, and fiberglass, it's not suitable for rough or crumbly surfaces. Ensure the surface is clean, dry, and free from dust or grease for optimal adhesion.
How do I remove objects mounted with Bostik Mounting Tape Strips?
To remove mounted objects, carefully peel them off the surface. Start from one corner and gently pull away, avoiding sudden jerks that could damage the surface. If residue remains, use an adhesive remover like our Bostik Glu Go or rubbing alcohol to clean the area.
Find new, smarter ways of doing things.
Find out what product you need, how to use it and where to buy it.
PRODUCT FINDER