SUPER EPOXY
A two part liquid epoxy ideal to use on rigid materials. It is quick setting, strong bonding, waterproof and oil resistant.
Clear
Features & benefits
Bostik Super Epoxy is a high strength epoxy adhesive that enables fast permanent repairs to many surfaces, including fibreglass, concrete, glass, metals, wood, and some plastics. The two components are easily mixed to form a clear, waterproof and chemical resistant bond which is gap filling and capable of bonding poorly mated surfaces. Ideal for emergency DIY repair work in and around the home. It is ideal for handicraft applications and gluing of small parts where clamping is not possible. Suitable for interior and exterior applications.
Bonds to metals, wood, glass, plaster, concrete, brick, granite, ceramic tiles, natural stone, rubber and some plastics such as fiberglass, polyacrylates, polycarbonates, ABS, and hard PVC.
Not suitable where a flexible or elastic bond is required. Not suitable for applications requiring heat resistance above 80°C. Does not bond to some plastics such as polyethylene, polypropylene or Teflon. Not suitable for structural applications. Cured adhesive may yellow if exposed to sunlight over long periods.
Downloads & resources
Bostik DIY South Africa Repair - Super Epoxy Technical Data Sheet (299.45 KB)
Bostik DIY South Africa Repair - Super Epoxy Safety Data Sheet (103.03 KB)
How to use
- Ensure that the surfaces are clean, dry and free of dust.
- Use the reverse side of the lid to pierce the seal of the tube.
- Extrude an equal quantity of the two components.
- Mix these thoroughly with the spatula provided, until a homogenous mixture is obtained.
- Only mix at one time, the amount that can be used within approx. 3 to 4 minutes.
- Apply the mixture thinly to both surfaces to be bonded.
- Join the two parts, and hold them together for approximately 15 minutes.
- The glued object can be handled lightly after approx. 15 minutes.
- Allow 30 minutes before rough handling or machining. Setting times may be slower in cold conditions.
- Full strength is achieved after 24 hours.
FAQs
I need more technical advice on this product?
Please call our Sticky Questions toll free helpline during office hours on 0800 222 400, or send an email [email protected].
How do I prepare the surfaces to be glued?
Before applying glue, ensure that all surfaces are of sound nature and clean, dry and free from dust, grease or any other contamination.
What is the shelf life of the adhesive i bought and where can i store it?
The shelf life of adhesives varies from product to product, but typically ranges between one and two years from the date of manufacture when unopened and stored correctly in dry conditions - usually between +5°C and +25°C. Once opened, the life of the product will be more limited – this is dictated by variables including the type of adhesive, how it is stored, and how much adhesive is left unused. For more information, refer to the product’s Technical Data Sheet.
Find new, smarter ways of doing things.
Find out what product you need, how to use it and where to buy it.
PRODUCT FINDER