BUILD SILICONE SEALANT
Construction grade silicone suitable for plaster and concrete.
Grey
Clear
Features & benefits
Bostik Build is a high quality neutral curing, low modulus 100% silicone sealant that provides a permanent flexible, durable, watertight seal for general purpose sealing. It exhibits excellent adhesion to alkaline surfaces such as concrete, fibrous cement, mortar, and plaster. It also offers excellent primerless adhesion to many non-porous materials e.g. ceramics, glass, enamel, porcelain, coated wood, painted surfaces, canvas, some rubber, most metals (mild steel, stainless steel, aluminium, copper, tin, galvanized iron, brass or zinc) and some plastics acrylics (epoxide, acrylics, polyester, polyacrylate, polycarbonates, polystyrene, formica, fiberglass, polycarbonates and rigid PVC).The sealant is extremely resistant to UV radiation, weathering, ageing and water, and offers excellent chemical resistance and is unaffected by alcohols, dilute acids and alkalis, soap and household detergents. The sealant remains flexible over a wide range of temperatures from -40°C to 120°C. It also performs as an excellent adhesive on non-porous surfaces where an elastic gap-filling bond is required. It has a non-sag rheology and can be applied to vertical surfaces.
Suitable for internal and external sealing applications, waterproofing and weatherproofing.
Sealing of connecting and expansion joints in the construction industry e.g. sealing of expansion and connecting joints in walls and floors.
Sealing of gutters, gutter outlets, and around building flashes.
Sealing of joints between glazing and supporting structures.
Perimeter sealing of doors, windows and cladding panels.
Sealing of double glazed units.
Mounting of small mirrors.
Sanitary ware applications i.e. sealing around bathroom and kitchen fittings, baths, showers and sinks.
Sealant for the electrical and electronics industries e.g. encapsulation of wires, insulating appliances.
Sealant in silo and container construction.
Suitable for bonding and mending tasks where elastic gap filling bond is required.
Technical Information
Bostik DIY South Africa Seal - Build Silicone Sealant Technical Data Sheet (441.04 KB)
Bostik DIY South Africa Seal - Build Silicone Sealant Safety Data Sheet (138.96 KB)
How to use
- Ensure surfaces are clean, dry and free of loose materials, dust, grease, rust and other contaminants.Use backing material when sealing deep cavities. If the area being sealed needs to be painted, ensure that the paint has dried before applying sealant.
- Use masking tape to get a clean, even sealant line and to eliminate cleaning difficulties on porous surfaces.
- Remove tape after silicone application before the sealant skins.
- Cut the tip off the cartridge and screw on the nozzle.
- Cut the tip of the nozzle at an angle to achieve the desired bead size.
- Apply with a caulking gun in a continuous bead to the prepared joint.
- Remove unwanted silicone immediately.
- Smooth down after application within 3-5 min before skin formation occurs, by using a flat or rounded tool.
- Sealant dries to touch in 1 hour and reaches full cure after approximately 24 hours.
FAQs
How do I store my silicone?
To maximize the shelf life of an opened silicone cartridge, we recommend that the nozzle be removed and a piece of plastic placed over the cartridge tip after which the nozzle must be screwed back on. A large screw inserted into the nozzle tip also helps to extend the life. Store in a cool environment.
I need more technical advice on this product?
Please call our Sticky Questions toll free helpline during office hours on 0800 222 400, or send an email [email protected].
Which sealant is the right one for my application?
Stuck in a rut and not sure which sealant is suitable for your application? Call our Sticky Questions Helpline during office hours on 0800 222 400 for technical support.
Find new, smarter ways of doing things.
Find out what product you need, how to use it and where to buy it.
PRODUCT FINDER